• Large, easy to read analog clock face
  
• Built-in signal device
  
• Prints time in regular or military time; AM/PM, 0-23 hours, minutes, tenths or hundredths
  
• Accommodates weekly, bi-weekly, semi-monthly and monthly pay periods
  
• Two-color printing to show irregular time
  
• Large easy to read clock dial
  
• 3 year battery backup
  
• Table or wall mount
  

• Dimensions: 7½"W x 8¾"H x 5"D
  
• Weight: 5.1 lbs.
  
• Power source: 110/120 VAC or 220/240 VAC +/- 10%, 50/60 Hz
  
• Power consumption: 5W (minimum), 30W (maximum)
  
• Ambient temperature: 14°F - 104°F
  
• Relative humidity: 10-90% (non-condensing)
  
• Environment: Indoor use only, dust free, not in direct sunlight
  
• Printing: Dot matrix
  
• Time card used: 3.375" wide, 0.244 spacing
  
• Clock accuracy: +3 seconds deviation per week
  
• Memory: Clock and programming data stored for up to 3 years without AC power
  

• Product Comes with 1 year manufacturer's warranty.
• For detailed warranty information or service contact Mercer Sales & Service at 570-346-0358

For Support or Repairs, Contact Us At 570-346-0358

FAQ:

To set the date/time:

1. Unlock Clock and Lift Cover.
2. Turn Dial so CLOCK D. L. S. and ADJUST appears
3. Press the button under YR/MO/DT, and use the + and - key to adjust the Year, Month and Date.
4. Press the button under HR/MIN and use the + and - key to adjust the Time.
5. Press the E key to save.

To set the Daylight Savings Time

1. Unlock Clock and Lift Cover.
2. Turn the Dial so CLOCK D.L.S and ADJUST appears.
3. Press the button under START and use the + and - key to adjust the start of Daylight Savings.
4. Press the button under END and use the + and - key to adjust the end of Daylight Savings.
5. Press the E key to save.