• Full power reserve keeps clock fully operational for 72 hours or 400 punches
  
• Automatic Daylight Saving Time adjustment
  
• Consecutive and repeat numbering
  
• Easy-to-replace ribbon cartridge
  
• Selectable imprints formats and character size
  
• Programmable alphanumeric imprint
  

• Dimensions: 5.9"W x 6.9"H x 6"D
  
• Weight: 6 lbs.
  
• Power requirements: AC120V +/-10%, 60 Hz
  
• Power consumption: 3W (normal), 6W (maximum)
  
• Ambient temperature: 14°F - 113°F
  
• Humidity: 10% - 90% (no condensation)
  

• Product Comes with 1 year manufacturer's warranty.
• For detailed warranty information or service contact Mercer Sales & Service at 570-346-0358

For Support or Repairs, Contact Us At 570-346-0358

FAQ:

To set the Date

1. Remove the cover
   
2. Press the PROGRAM button.
   
3. The Mode Indicator will illuminate, move the cursor under “YEAR, MONTH, DATE", Press ENTER
   
4. The year will begin to flash. If necessary, press the CHANGE button until the desired year appears in the display, then press ENTER.
   
5. The month will begin to flash. If necessary, press the CHANGE button until the desired month appears in the display, then press ENTER.
   
6. The date will begin to flash. If necessary, press the CHANGE button until the desired date appears in the display, then press ENTER.
7. The entire display will begin flashing. press ENTER.

To set the Time

1. Remove the cover
   
2. Press the PROGRAM button.
   
3. The Mode Indicator will illuminate, move the cursor under “HOUR, MINUTE", Press ENTER
4. The hour will begin to flash. If necessary, press the CHANGE button until the desired hour appears in the display, then press ENTER.
   
5. The minute will begin to flash. If necessary, press the CHANGE button until the desired minute appears in the display, then press ENTER.
6. The entire display will begin flashing. press ENTER.

To set the Daylight Savings Time

1. Remove the cover
   
2. Press the PROGRAM button.
   
3. The Mode Indicator will illuminate, move the cursor under “BEGIN DAYLIGHT SAVING", Press ENTER
4. The year will begin to flash. If necessary, press the CHANGE button until the desired year appears in the display, then press ENTER.
   
5. The month will begin to flash. If necessary, press the CHANGE button until the desired month appears in the display, then press ENTER.
   
6. The date will begin to flash. If necessary, press the CHANGE button until the desired date appears in the display, then press ENTER.
7. The entire display will begin flashing. press ENTER.
8. Press PROGRAM, move the cursor under “END DAYLIGHT SAVING", Press ENTER
9. The year will begin to flash. If necessary, press the CHANGE button until the desired year appears in the display, then press ENTER.
   
10. The month will begin to flash. If necessary, press the CHANGE button until the desired month appears in the display, then press ENTER.
    
11. The date will begin to flash. If necessary, press the CHANGE button until the desired date appears in the display, then press ENTER.
12. The entire display will begin flashing. press ENTER.